Throw Out the Broom with Pro Spot's Dust Free Sanding System



Comments

Post a Comment

Popular posts from this blog

TECH TIP: SP MIG 'Hot Start': The Why & How!

Image
SP MIG 'Hot Start': The Why & How! The Benefits & Programming of the SP Pulse MIG Welder's Hot Start Function. Quick Overview It's no secret that welding aluminum is different than steel. One of the biggest differences is how heat is dissipated on aluminum. Steel: Heat stays confined to the area where the heat is applied. Aluminum: Heat rapidly transfers throughout the material.  This causes what is known as a " Cold Start ";  the beginning of the weld bead is weak due to not enough heat at the start causing poor penetration. To counter this we have two options:  Tail-In Method -   You start the weld outside and move in toward the weld join so that the material is pre-heated allowing proper penetration.  Hot Start function  - The cleanest way to program it and avoid the cold start. (See VIDEO below) Solution :  The SP series MIG welder's " Hot Start Function ", allows us to dial up the amper
Read more

Tesla Approves the Pro Spot PR-5 Rivet Gun

Image
TESLA TESTED AND APPROVED FOR:   SPR Self-Piercing Rivet (Installation/ Removal), Flow Form (Hole Preparation/ Installation) and Structural Blind Rivets for Tesla repairs. Pro Spot's PR-5 Riveting System has been approved for collision repairs on Tesla vehicles. The Riveting System now has a Tesla Die Kit designed for SPR (self-piercing rivets) installation and removal, Flow Form rivets hole preparation and installation and structural Blind Rivets installation.  Pro Spot has a variety of options available for current PR-5 Rivet Gun owners as well as new systems for new customers.   Learn more about the different PR-5 Applications on our Video Channel !
Read more

TECH TIP: How to Apply Solid Rivets Faster & Easier

Image
Still Using Bucking Bars to Apply Rivets? Image shows the EXT-25 Extender and the Solid Rivet Dies Head and Forming sides.  Apply Solid Rivets with One Button!  For faster, easier application of Solid Rivets:  U se the Solid Rivet dies with the Pro Spot PR-5 Rivet Gun. The dies easily screw onto the Rivet Gun and is ready to work right away.  Photo Credit:  Bettmann/  Bettmann Archive To improve the application of Solid Rivets,  Pro Spot has designed new Solid Rivet Dies in an effort to help shops save time and hassle .  No longer will you need to "make something work", using a loud air hammer with a bucking bar, or use flattening dies which can be dangerous. Installing solid rivets is now as easy as installing an SPR!  WHAT :  NEW SOLID RIVET DIES- Solid Rivet Die Head Side (PRR-40) and Forming Side (PRR-41). WHERE : Easily screw on threads to PR-5 Rivet Gun. WHEN :  Areas requiring Solid Rivets and you have access to
Read more